|Date Added:||15 February 2005|
|File Size:||51.89 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Neither the device nor the driver control how VFs are mapped into config space.
Inte, you plug in a different type of module, the driver will not load. In this case upgrading to latest and greatest is usually something to consider, especially if you observe some anomalies when booting from the network. Off Laser output power low alarm: Prior to kernel 3.
CONFIG_IXGBEVF: Intel(R) 10GbE PCI Express Virtual Function Ethernet support
lunux Off Module temperature low alarm: Supports multiple ,inux for flexible flow classification and load balancing in SFP mode only. On Laser output power high alarm: If you are using a single interface defaultit will be eth0. Instead, proceed to this procedure: The traffic is associated with a specific class based on priority, which has a value of 0 through 7 used in the VLAN tag.
Amazon EC2 provides enhanced networking capabilities through the Intel VF interface, which uses the Intel ixgbevf driver.
networking – Linux and Intel ES Gigabit SFI/SFP+ link always down – Super User
This command only enables or disables Flow Control if auto-negotiation is disabled. For more information, such as detailed syntax for commands, file locations, or package and tool support, see the specific documentation for your Linux distribution. From your local computer, reboot your iintel using the Amazon EC2 console or one of the following commands: Use ethtool to change the flow control settings. Copyright c Intel Corporation. Off Laser bias current low alarm: All other operations are supported under Windows.
Off Module voltage high warning: Enhanced networking cannot be managed from the Amazon EC2 console. The latest ethtool version is required for this functionality. Please see your system documentation for details.
The PF supports the DCB features with the constraint that each traffic class will only use a single queue pair. Off Module temperature llnux warning: To check whether an instance has the enhanced networking sriovNetSupport attribute set, use one of the following commands:. To check whether an AMI already has the enhanced networking sriovNetSupport attribute set, use one of the following commands:. Yes Laser bias current: Home Questions Tags Users Unanswered.
Use the ifconfig command to increase the MTU size. On Laser bias current high alarm threshold: Therefore, you can use this AMI to launch another instance with enhanced networking enabled by default. For more information and to see other configuration options, see Predictable Network Interface Names on the freedesktop.
Depending on your system configuration, number of slots, etc. Versions of ixgbevf earlier than 2. The second command will fail with an error.