Site Overlay


No matter what else, this board is an Asus, and that means a lot. From these three characteristics you can tell lot about the board. The 12v power connector was located in a somewhat strange spot, below and to the left of the processor but this was not a problem, though aesthetically it is not the best spot. They are nicely situated about two inches below the memory. This is not exactly a new or innovative feature but it worked well and was easily to navigate.

Uploader: Mojind
Date Added: 13 February 2016
File Size: 38.82 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 6504
Price: Free* [*Free Regsitration Required]

First the FSB speed at stock was Please refer to the specification page The product electricalelectronic equipment, Mercury-containing button cell battery should not be placed in municipal waste.

ASUS P4P SE – motherboard – ATX – Socket – iPE Overview – CNET

It can do so from a file you have downloaded or straight from an Asus FTP. Please check with your supplier for exact offers. This the p4o the last board in an evolution of skt boards that have been around since the inception of the P4. Here is the top right corner of the P4P SE. We hopped back into BIOS and set them at No more DOS-based flash utility and bootable diskette required. Once you are used to the BIOS it is not bad to work with, but it takes some time, especially if you are used to a more standard layout.

Once the serizl setup was complete we started tinkering seral. The computer used BIOS v Please check with your supplier for exact offers. Immediately we ran CPU-Z and noticed two things.


It booted up and installed Windows flawlessly. CPU Lock Free boosts overall system performance by making synchronous modification possible.

ASUS P4P800 – motherboard – ATX – Socket 478 – i865PE Series

In general the Asus motherboard did quite well, certainly enough for you to realize why so many enthusiast opted to go with Springdale motherboards as opposed to sedial more expensive Canterwood counterparts. This is not esrial a new or innovative feature but it worked well and was easily to navigate.

With its Prescott compatibilities this board can run any skt processor, many of which can compete with the other, more exciting processors out there. AI NET2 remotely detects cable connection the second you turn on the system, and any faulty connections are reported back up to meters at 1 meter accuracy. There are also two connectors for the IDE drives and one for a floppy drive. Check local regulations for disposal asjs electronic products.


This can be done without srrial the comfort of Windows. This means prices are falling even though the performance of socket hardware is still very close to that of other platforms.

In this range we ran the CPU at stock voltage, and the memory at 1. This is about what the findings have been over our experience with skt motherboards, though there is usually a surprise to two when the Springdale beats the Canterwood. After this point we slackened the memory timings from aat 2.


This included running two instances of Prime95 at the same time. More than anything else the socket lacks future potential, but if adus are buying a hardware right now, or even within the next few months that does not really matter. All specifications are subject to change without notice.

Under normal circumstances we found this MB to be very easy to work with, stable, and quite speedy, especially in booting up and shutting down. Nothing extraordinary here but note that Asus has opted to include a locking mechanism which many manufacturers have stopped using. The main problems with the P4P SE are all external.

The socket is placed along the top of the board which is usually good for clearance when using a larger heatsinks. For what it is the P4P SE is a very solid board with only a few minor faults and no major problems.

PCB color and bundled software versions are subject to change without notice. Once its here we plan on getting some faster memory and really testing the limits of this mainboard. Users can reboot their system through the support CD when a bootable disk is not available, and go through the simple BIOS auto-recovery process.